Photo: Antonio Mette (CC BY-SA 4.0, logo removed and extended)
- What does floor standing aircon installation involve?
- What does the site survey check, and what moves the quote?
- Who decides on the power supply for a floor-standing unit?
- What are the steps from survey to handover?
- What should you prepare before installation day?
- Book the survey before you commit to a spot
What does floor standing aircon installation involve?
Floor standing aircon installation connects a tall indoor unit on the floor to an outdoor condenser outside the building. The job covers securing the indoor unit, mounting the condenser, coring the wall, running insulated refrigerant pipes, a drain pipe and a control cable between them, connecting the unit to a power supply that suits it, and a test run before handover.
The heavy indoor unit is normally fixed to the wall behind it so it cannot tip. Still deciding whether this type suits your space? Read the floor-standing aircond guide first.
What does the site survey check, and what moves the quote?
A floor-standing installation quote depends on the premises, not only on the unit. The technician checks where the indoor unit will stand, where the condenser can go, how far the pipes must run, where condensate water will drain, and whether the power supply suits the unit. Each point changes the work, the materials or the access needed.
| Survey point | What the technician checks | Effect on the quote |
|---|---|---|
| Indoor position | Floor space, clearance, airflow clear of racks | Far from an outside wall means longer pipes |
| Outdoor condenser | Ground, bracket or rooftop; access for future service | Brackets and roof work add labour |
| Pipe route | Distance, turns, ceiling or trunking | More pipe, insulation and time |
| Wall coring | Brick, concrete, or a glass frontage that needs another route | Thick concrete takes longer |
| Drain route | A gravity path with enough fall | No fall may need another route or a drain pump |
| Power supply | Switchboard capacity, dedicated circuit | Electrical work may be added |
| Building rules | Condo or shoplot rules on position and working hours | Can change position or schedule |
Who decides on the power supply for a floor-standing unit?
A qualified person decides the power supply for a floor-standing aircond, not the owner. A floor-standing unit can draw more power than a small wall unit, so the survey checks whether the switchboard can take it or a dedicated circuit is needed. In Malaysia, electrical works must be done by a competent person certified by the Energy Commission.
The Suruhanjaya Tenaga competent person page lists those categories. Never extend a socket or swap a breaker yourself. For an existing unit being relocated, switch it off at the isolator before anyone opens a cover.
What are the steps from survey to handover?
A floor-standing installation with Aircon Hero follows six steps: survey, quote, approval, installation, test run and handover. The survey fixes the positions and the route, and nothing is cored or mounted until the owner has agreed to the scope in the quote.
- Survey: positions, routes, power and rules checked on site.
- Quote: the scope for that premises.
- Approve: the owner agrees before work starts.
- Install: unit secured, condenser mounted, wall cored, lines connected.
- Test run: cold air at the outlets, water draining, no leaking joints.
- Handover: controls and filter location shown to the owner.
What should you prepare before installation day?
Prepare the premises so the technicians can reach both ends of the job. Clear the floor where the indoor unit will stand and the path to it, make the outdoor or rooftop spot reachable, and get management approval for a condo or shoplot before the date is set.
Tell Aircon Hero when the premises is free and the team confirms a slot. Move stock and fragile items away from the wall being cored, because coring throws dust.
Book the survey before you commit to a spot
Arrange the survey before shelving or furniture goes in. Request a site visit through the contact page or WhatsApp +60 18-355 5162; the price list for wall-mounted and other units does not cover this work. Businesses can see commercial air-conditioning. Afterwards, Aircon Hero's CIDB-registered technicians handle floor-standing aircond service. For wall units, see what drives installation charges for wall units (in Malay).
Frequently Asked Questions
Sources: Register as Competent Person | Suruhanjaya Tenaga (2026-09)
Talk to an Aircon Hero Technician
Seven days a week across Klang Valley. Send the brand, model and what the unit is doing, and the job is quoted before any work starts.